www.routerlogin.net setup

www.routerlogin.net setup issues FAQ :

Query 1: Where do I go on the routerlogin.net webpage to update my software for my Nighthawk router, I received an email from Netgear about updating the firmware. I have been going around in circles trying to figure this out. Now I’m trying to go to routerlogin.net and it won’t let me. I can’t find that genie thing on my computer that u tube video mention

Sol: It is recommended to update Netgear router firmware to avoid security-related bugs, and to remove any router issues if any in previous versions, to update your Netgear router firmware , simply connect your computer with Netgear router using an ethernet cable , connect a ethernet cable from LAN slot of Netgear router to your computer , open a web browser and type http://routerlogin.net or http://routerlogin.com in address bar of your browser , a login screen will appear, use username as admin and then enter your Netgear router login password, alternatively you can use IP address 192.168.1.1 to access Netgear login web console window, click on advanced section >> firmware update, you can manually download latest Netgear firmware from Netgear official website .

Query 2: I called my cable company and they said the modem is working fine we even turned it off and on and I can’t get the internet. The wifi was on but not even that now, I brought a new router from you and cannot connect to the internet.
Resolution: Try to login to www.routerlogin.net or with an IP address 192.168.1.1. To set up a router you need to have a desktop or laptop however tablets and Ipad will also work if you are trying to set up wirelessly. 
Steps to configure using a Desktop or Laptop.
1. Make sure your Modem is on and working fine.
2. Check the lights on the Router green or white depending upon the model#.
3. Make a hardwire connection from your Modem box (ISP) to New or Old Router.
Note: Hardwire connection is a must to set up the router.
4. There are two ways to set up the router.
(i) Hardwire (ii) Wireless
5. Let’s begin with the 1st Method.
(i) Mention in note 3 makes a connection from modem to the yellow slot of your router. Then connect your computer to router with an extra ethernet cable. 
(ii) Once connected try to open a website www.routerlogin.net or IP address 192.168.1.1
(iii) Always select the Router Mode option that’ll help you the get the maximum benefits on the router.
(iv) Enter the Admin Account Settings and follow the steps accordingly.
Once done your router is setup. 
6. 2nd Method:-
(i) Make a connection from modem to the yellow slot of your router. Connect your computer wirelessly with Netgear.
(ii) SSID and Password of the Netgear are mentioned on the label.
(iii) Repeat (ii) of 5 to (iv).
Note: If you do not have a laptop or desktop use Android, Apple or Windows tablets to configure the router wirelessly.
Moreover, if you are having any issue Make a reset on the router for 30 sec with a paperclip and then try to configure it.

Query 3: Just set up a new router and can not log in to routerlogin.net, I need to do some port forwarding for my surveillance system, my computers not letting me chose the correct router but are cell phones.I am using Netgear r 8000 Netgear nighthawk x 6 new generation router?
Resolution 3: If in case it is not responding try to reset the router and try to configure it one more time. Once setup try to change the wireless settings to something easy that you can remember or use. After Settings up the router following steps needs to follow.
1. Open the browser and log in to Netgear Management Page i.e routerlogin.net
2. Once logged in Click on Advanced Tab.
3. Click on Advanced Option.
4. Click on Port Forwarding / Port Triggering.
5. Click Add Custom Service.
6. Servies Name will be Anything Like. Camera1, Camera2, Camera3.
7. Select the Service Type. TCP or UDP.
8. External starting and Ending Point Should be the same.
9. Select the IP address of your device from the list given below.
10. Click Apply.
Note: While forwarding the ports you need to have the ports number with you. 
It also can add more than 1 Ports. for eg if you wanted to open 3 ports you need to follow the steps 3 times.

Query 4: My main router for Xfinity went out and I swapped out the box. Now I can’t log in into my Netgear router, Connected router as directed and I have connected to wifi but in the past, I could choose which one I wanted and could set up new passwords.
Resolution 4: You can set up the new password as well. If you are having an issue dont worry perform a reset on the router with a paper clip on the router for 15 sec. Make sure while performing the reset on the router the power should be blinking. Wait for a couple of minutes for Power to stable green or White. Once reset you need to follow the steps.
Steps to configure using a Desktop or Laptop.
1. Make sure your Modem is on and working fine.
2. Check the lights on the Router green or white depending upon the model#.
3. Make a hardwire connection from your Modem box (ISP) to New or Old Router.
Note: Hardwire connection is a must to set up the router.
4. Once connected try to open a website www.routerlogin.net or IP address 192.168.1.1
5. Always select the Router Mode option that’ll help you the get the maximum benefits on the router.
6. Enter the Admin Account Settings and follow the steps accordingly.

Leave a Reply

Your email address will not be published. Required fields are marked *